Hello! Today, I'm going to show you three party decorations that you can make for a New Years party. I'll show you how to make a party hat, a garland, and a star wall decoration. In the comments down below let me know what you think about these DIYs.
Let get started!
DIY Party Hat
The first thing you want to do is print out a template or make the template yourself and cut the template out.
Then you want to trace the template onto a piece of colored paper like scrapbook paper or cardstock paper and cut it out.
If you use a template that needs to have an opening for the cone of the party hat to be together like mine you can cut the hole out with an x-acto knife.
Then you want to take the piece you just cut out and roll it into a cone.
If you are using the same template as me, you want to put the tab of the paper into the hole that you cut out with the x-acto knife and then put some tape inside of the cone to hold the cone together.
Then you want to make a hole onto each side of the cone with an x-acto knife. Be careful because the knife is sharp and you can put the holes into the paper before making the cone of the party hat.
After you're done making the holes, you want to take some ribbon and run it through one of the holes. Then you want to tie the ribbon that is inside of the cone into a knot. Do the same thing to the other hole on the cone with another piece of ribbon.
The last thing you have to do is glue on a pom pom onto the top of the party hat with a glue gun.
DIY Glitter Garland
You want to trace a circular object onto a piece of paper that is the same color as the glitter you're going to use or you can also use glitter paper instead and cut out as many as you want.
Then you want to trace a bigger circular object onto a different color of paper and cut out as many as you want.
After you cut out all of your circles, you can punch a hole into all of them with a hole puncher.
Now you want to take the circles that are going to have glitter on them and put Mod Podge onto all of them with a paintbrush. Then you want to put the glitter onto all of them while the Mod Podge is wet. If you are going to use glitter paper ignore this step.
Then you want to pick the circles up and lightly shake off the glitter and wait for them to fully dry.
The last thing you have to do is run some string or twine through the holes of the circles and hang it on a wall with some tape.
DIY Glitter Star Decoration
The last DIY I'm going to show you how to make is this star decoration.
You want to print out or draw out a big star and a smaller star on paper and cut both of the stars out.
Then you want to trace the big star onto some cardboard and then you want to trace the smaller star in the middle of the star.
When you are done tracing the stars you can cut out the stars with scissors or an x-acto knife. I cut out the big star with the scissors and then used the x-acto knife to cut out the smaller star
Now you can make a hole on the star with an x-acto knife or depending on how thick the cardboard is you can use a hole puncher.
Then you can put Mod Podge onto the star with a paintbrush and then you can pour some glitter onto the star.
Then pick up the star and lightly shake off the extra glitter.
The last thing you have to do is tie a piece of sting through the hole that you created and tie a loop so the star hangs on a hook on the wall or from the ceiling.
and that's it! In the comments down below let me know what you think about these DIYs.
Yorumlar
Yorum Gönder