3 Easy DIY Kpop Phone Cases | BTS Edition

In the video I'm going to show you how to make kpop phone cases. I'll be showing you how to make DIY BTS phone cases in three different ways. These phone cases are easy to make.

In the comments down below let me know what which one is your favorite.

You can watch this video to learn how to make these or read below!

1. Trace the phone case onto the back of a piece of paper that's any color and then you want to cut that out.

2. Stick the paper into the phone case and you want to mark where the camera hole is and then you can cut the camera hole out with an x-acto knife or scissors.

3. Print off a picture of BTS, another artist or you can just print off a picture of one of the members and you want to take the picture and cut it down so it will fit on the paper that you just cut out. Make sure you leave enough room for a border that you will make later.

4. Place a piece of tape onto the back of the picture and then you want to put it on a corner of a piece of paper that's any color but you want to leave a border around two sides of the picture.

5. Measure how big you made the border and mark where the other two sides need to be cut and then you can cut the rest of the border.

6. Tape the picture onto the paper that fits into the case and then you can stick the paper into the phone case and you're all done.

1. Trace your phone case onto the back of any color of cardstock paper and then you want to cut it out and you want to cut out the camera hole.

2. Draw BTS' logo onto the paper. If you want you can trace the logo onto the paper or you can free hand draw it.

3. Paint it in with white or another color of acrylic paint. For the letters I used a pencil as a paintbrush to paint in the letters because they were small. You can do this too or you can use a smaller paintbrush.

4. When the paint is dry you can erase any pencils markings and then you can stick it into the phone case and you're all done.

1. Trace the phone case onto the back of any color of paper and cut the paper and you want to cut out the camera hole.

2. Print and cut out some BTS pictures.

3. Lay them out onto the paper you just cut out so you'll have an idea of how you want the phone case to look like.

4. Tape the pictures onto the paper.

5. Trim the pictures so they fit the paper and the phone case.

6. Put the paper into the phone case and you're all done.